电缆编码器 - 旋转变压器 Cable Encoder-Resolver
该伺服编码器电缆，以屏蔽电源和控制电缆组合，专为编码器设计。在动态安装中具有超柔韧性和高耐磨性和弯曲性，适用于需要良好电磁保护的链条。由特殊聚氨酯制成的外护套提供额外的保护效果，防止磨损，水解和最常见的化学试剂和油。
Combinated shielded power and control cable, specially designed for Encoder-Resolver. Extra-flexible and with high resistance to abrasion and bending in dynamic installations, suitable for use in energy chains when good electromagnetic protection is necessary. The outer cover made of special polyurethane provides additional protection against abrasion, hydrolysis and the most common chemical agents and oils.
技术特点 Technical characteristics
1. 工作电压Operating voltage
300V
2. 测试电压Test Voltage
2000V
3. 最小弯曲半径 Min. bending radius
固定安装：5xD Fixed installation: 5xD
移动电缆：7.5xD Moving cable: 7.5xD
4. 工作温度（导体）Operating Tª (conductor)
-40°C至+ 80°C
5. 最大循环弯曲次数Bending cycles, max.
6.000.000
6. 最大链速Maximum chain speed
300 m/min
7. 最大加速度Maximum acceleration
50 m/s²
8. 最大链长Maximum chain length
10米（水平）10 m (horizontal)
结构 Structure
1. 导体 Conductor
超柔性裸铜丝Extra flexible bare copper wires
2. 绝缘 Insulation
PE，TPE ,PUR
3. 装配Assembly
屏蔽控制对和电源绝缘导线连接在一起+在机组上缠绕无纺布带，最后填充在空隙中
Screened control pairs and power insulated conductors cabled together + wrapping of non woven tape over the set with eventual fillings in the interstices
4. 组成Composition
组成颜色Combined colours:
详情见南游参数表· See table "Formation"
5. 总屏蔽 Overall screen
镀锡铜丝编织 Tinned copper wire braid
覆盖率：85％ Coverage: 85%
+无纺布胶带 + non woven tape
6. 外护套 Outer sheath
聚氨酯 橙色 RAL 2003 Polyurethane Orange RAL 2003
标准/属性 Standards / Properties
1.参考文件 Ref. for construction/drawing
根据UL 758，UL 1581和CSA 22.2 210.2
（UL 80°1000V - CSA AWM I / II A / B 80°C 1000V）
根据NFPA 79-2012第12.9章
According UL 758, UL 1581 and CSA 22.2 210.2
(UL 80° 1000V - CSA AWM I/II A/B 80°C 1000V)
According NFPA 79-2012 Chapter 12.9
2. 阻燃 Flame Retardant
UNE-EN 60332-1 (IEC 60332-1) ; CEI 20-35 ; UL VW-1 ; CSA FT1
3. 无卤素 Halogen free
UNE-EN 60754-1 (IEC 60754-1) ; CEI 20-37
4. 耐油和碳氢化合物 Oil and hydrocarbon resistant
UL 1581 ; VDE 0472 part 803 A/B ; HD 22.10 S1 ; CNOMO E.03.40.150N
5. 防水Water resistant
UL 1581 ; IEC 60811
